Fabrication of glass-based analytical devices by immobilizing nanomaterials on glass substrate with a fluorescent glue for the highly sensitive determination of mercury ions

• DOI: 10.1007/s00604-023-05875-z
• Publication Date: 2023-07-28T11:02:45Z
• Authors: Yumin Leng; Panpan Qu; Anyi Wang; Kai Jiang; Yuchen Dong; Pei Han; Jinbing Cheng; Liwei Zhang
• Keywords: Nanomaterials; GLUE; Certified reference materials; Nafion

A facile method is reported to develop glass-based analytical devices (GADs) based on immobilizing nanomaterials on a glass substrate with fluorescent glue. The fluorescent glue was first prepared by coupling bovine serum albumin (BSA)-protected Au nanoclusters (NCs) and sugars (i.e., ascorbic acid, AA). The glue was then used to immobilize carbon dots (C-dots) on glass substrates to fabricate the portable GADs. The liquid glue-C-dots mixture and probable GADs were developed for Hg2+ detection. Under 365-nm excitation wavelength, the emission at 652 nm from the glue is gradually quenched with increasing concentrations of Hg2+. This quenching is explained in terms of the Stern-Volmer equation and is ascribed to static quenching. The fluorescent color of the glue and GADs gradually changes from pink to blue, with increasing concentrations of Hg2+. The limits of detection (LODs) for Hg2+ determination by bare eyes are 1 nM both for the glue and GADs, suggesting an uncompromised sensing capability even after immobilization. The detection sensitivity of GADs shows a significant improvement compared with the same material-based papers (5 μM). A linear relationship is observed between the total Euclidean distances (EDs) and Hg2+ concentration in the range 0-100 nM, providing the potential for Hg2+ quantification using GADs. The LOD is estimated to be 0.84 nM. To show a potentially practical application, the GADs were used to detect Hg2+ in certified reference material and lake water.