Effects of Slide/Roll Ratio on the Behaviours of Grease Reservoir and Film Thickness of Point Contact

• DOI: 10.1007/s11249-014-0301-8
• Publication Date: 2014-02-03T09:20:32Z
• Authors: Lu Huang; Dan Guo; Shizhu Wen; George T. Y. Wan
• Keywords: 0203 mechanical engineering; 02 engineering and technology

The film formation mechanism of lithium complex grease under starved condition was proposed based on the analysis of the relationship between grease reservoir and the finger-shaped lubricant along the rolling track using a laboratory built ball-on-disc test rig. Film thicknesses with rolling time at different slide/roll ratios were measured and discussed in detail. Experimental results showed that starvation occurred soon after the operation under pure rolling condition. In contrast, the contact remained fully flooded under slide–roll condition. The measurement of grease fingers proved that slide/roll ratio contributed to replenishing the contact by transferring more grease to the vicinity of the contact to form a lager lubricant reservoir. The volume of grease fingers, the inlet lubricant supply and the film thickness at different slide/roll ratios were found to be in good agreement.