On the surface trapping parameters of polytetrafluoroethylene block

• DOI: 10.1016/j.apsusc.2006.03.082
• Publication Date: 2006-05-05T06:20:11Z
• Authors: Guan-Jun Zhang; Kai Yang; Wen-Bin Zhao; Zhang Yan
• Keywords: 02 engineering and technology; 0210 nano-technology; 7. Clean energy

Abstract Surface flashover phenomena under high electric field are closely related to the surface characteristics of a solid insulating material between energized electrodes. Based on measuring the surface potential decaying curve of polytetrafluoroethylene (PTFE) block charged by a needle-plane corona discharge, its surface trapping parameters are calculated with the isothermal current theory, and the correlative curve between the surface trap density and its energy level is obtained. The maximum density of electron traps and hole traps in the surface layer of PTFE presents a similar value of ∼2.7 × 10 17 eV −1 m −3 , and the energy level of its electron and hole traps is of about 0.85–1.0 eV and 0.80–0.90 eV, respectively. Via the X-ray photoelectron spectroscopy (XPS) technique, the F, C, K and O elements are detected on the surface of PTFE samples, and F shows a remarkable atom proportion of ∼73.3%, quite different from the intrinsic distribution corresponding to its chemical formula. The electron traps are attributed to quantities of F atoms existing on the surface of PTFE due to its molecular chain with C atoms surrounded by F atoms spirally. It is considered that the distortions of chemical and electronic structure on solid surface are responsible for the flashover phenomena occurring at a low applied voltage.