Texturing of polypropylene (PP) with nanosecond lasers

• DOI: 10.1016/j.apsusc.2016.01.206
• Publication Date: 2016-01-27T02:30:14Z
• Authors: A. Riveiro; R. Soto; J. del Val; R. Comesaña; M. Boutinguiza; F. Quintero; F. Lusquiños; J. Pou
• Keywords: 02 engineering and technology; 0210 nano-technology

Abstract Polypropylene (PP) is a biocompatible and biostable polymer, showing good mechanical properties that has been recently introduced in the biomedical field for bone repairing applications; however, its poor surface properties due to its low surface energy limit their use in biomedical applications. In this work, we have studied the topographical modification of polypropylene (PP) laser textured with Nd:YVO4 nanosecond lasers emitting at λ = 1064 nm, 532 nm, and 355 nm. First, optical response of this material under these laser wavelengths was determined. The application of an absorbing coating was also studied. The influence of the laser processing parameters on the surface modification of PP was investigated by means of statistically designed experiments. Processing maps to tailor the roughness, and wettability, the main parameters affecting cell adhesion characteristics of implants, were also determined. Microhardness measurements were performed to discern the impact of laser treatment on the final mechanical properties of PP.