Flexible piezoelectric nano-composite films for kinetic energy harvesting from textiles

• DOI: 10.1016/j.nanoen.2017.01.037
• Publication Date: 2017-01-17T16:33:49Z
• Authors: Ahmed Almusallam; Zhenhua Luo; Abiodun Komolafe; Kai Yang; Andrew Robinson; Russel Torah; Steve Beeby
• Keywords: Textile

Abstract This paper details the enhancements in the dielectric and piezoelectric properties of a low-temperature screen-printable piezoelectric nano-composite film on flexible plastic and textile substrates. These enhancements involved adding silver nano particles to the nano-composite material and using an additional cold isostatic pressing (CIP) post-processing procedure. These developments have resulted in a 18% increase in the free-standing piezoelectric charge coefficient d33 to a value of 98 pC/N. The increase in the dielectric constant of the piezoelectric film has, however, resulted in a decrease in the peak output voltage of the composite film. The potential for this material to be used to harvest mechanical energy from a variety of textiles under compressive and bending forces has been evaluated theoretically and experimentally. The maximum energy density of the enhanced piezoelectric material under 800 N compressive force was found to be 34 J/m3 on a Kermel textile. The maximum energy density of the enhanced piezoelectric material under bending was found to be 14.3 J/m3 on a cotton textile. These results agree very favourably with the theoretical predictions. For a 10x10 cm piezoelectric element 100 µm thick this equates to 38 μJ and 14.3 μJ of energy generated per mechanical action respectively which is a potentially useful amount of energy.