Comparison of water‐retention functions obtained from the extended evaporation method and the standard methods sand/kaolin boxes and pressure plate extractor

• DOI: 10.1002/jpln.201100325
• Publication Date: 2012-06-04T16:49:15Z
• Authors: Uwe Schindler; Lothar Mueller; Milton da Veiga; Yuming Zhang; Sandro Schlindwein; Chunsheng Hu
• Keywords: 0401 agriculture, forestry, and fisheries; 04 agricultural and veterinary sciences; 6. Clean water

AbstractKnowledge of the soil hydraulic functions is required for various hydrological studies and for the simulation of water and solute fluxes in unsaturated soils. Sand/kaolin boxes are frequently used to determine these properties in the low‐tension range. For higher tensions the pressure plate extractor is mainly applied. The extended evaporation method allows a more efficient determination of the water‐retention curve in an adequate range. Besides this method enables to quantify simultaneously the unsaturated hydraulic‐conductivity function. The objective of this study was to compare the water‐retention curves obtained from the standard methods (STM) with those determined with the extended evaporation method (EEM). A set of 90 natural soil samples of different texture and origin was analyzed, and the agreement between the methods was statistically evaluated. The average water‐content deviation (AWCD) of all samples was 1.83 vol.%, and the root mean square error (RMSE) 2.08 vol.%. The deviation of soil water‐storage capacity in the pore‐size classes 0–6, 6–30, 30–500, 500–1500 kPa varied between minimum –0.17 and 0.25 vol.% and maximum –2.89 and 2.36 vol.%, and confirmed the good comparability among the adopted methods. Systematic deviations between the methods were not found.