Particulate fracture during deformation of a spray formed metal-matrix composite

• DOI: 10.1007/bf02646597
• Publication Date: 2007-06-12T05:31:26Z
• Authors: J. Llorca; A. Martin; J. Ruiz; M. Elices
• Keywords: Breakage; Ductility (Earth science); Volume fraction

The mechanisms of deformation and failure in a 2618 Al alloy reinforced with 15 vol pct SiC particilates were studied and compared with those of the unreinforced alloy, processed by spray forming as well. Tensile and fracture toughness tests were carried out on naturally aged and peak-aged specimens. The broken specimens were sliced through the middle, and the geometric features of fractured and intact particulates were measured. The experimental observations led to the conclusion that failure took place by the progressive fracture of the particulates until a critical volume fraction was reached. An influence of the particulate size and aspect ratio on the probability of fracture was found, the large and elongated particulates being more prone to fail, and the fracture stress in the particulates seemed to obey the Weibull statistics. The dif- ferences in ductility found between the naturally aged and peak-aged composites were explained in terms of the number of broken particulates as a function of the applied strain. Numerical simulations of the deformation process indicated that the stresses acting on the particulates are higher in the peak-aged material, precipitating the specimen failure. Moreover, the compressive residual stresses induced on the SiC during water quenching delayed the onset of particulate breakage in the naturally aged material.