Determination of low-level mercury based on a renewable-drops sensing technique

• DOI: 10.1007/s002160000599
• Publication Date: 2002-10-06T11:06:07Z
• Authors: RongHua Yang; KeMin Wang; Dan Xiao; Kan Luo; XiaoHai Yang
• Keywords: Photodiode; Mercury; Photocurrent; Linear range

The design and characteristics of a novel drop-based fluorescence-detection technique for the determination of mercury(II) are described. The method, using a flow injection technique, is based on the renewable-drops of 3,3',5,5'-tetramethylbenzidine(TMB), which are formed at the bottom tip of a silica capillary tube connected to the end of the flow system. An excitation beam from a high-pressure Hg lamp directly illuminates the drops, the fluorescence emission is conducted to a photodiode (PD) to convert the photocurrent into a voltage signal (mV). Optimum analytical conditions for Hg(II) assays have been established. In NaAc/HAc buffer at pH 3.09 this assay has a wide linear range for Hg(II) from 8.0 x 10(-8) to 2.0 x 10(-5) mol/L with a detection limit of 2.0 x 10(-8) mol/L. The use of renewable drops allowing a fresh reaction surface for each sample is of particular value to solving the problems of irreversible reactions. Besides its high sensitivity, the method permits a simple, fast, and inexpensive measurement with only micro-quantities of reagent consumption. The technique described provides a simple and sensitive way to fabricate sensors of feasible prospects and commercial advantages.