A 183-GHz FMCW Transceiver Module for Wireless Fuse Applications

• DOI: 10.1007/s10762-020-00764-5
• Publication Date: 2021-01-04T09:11:13Z
• Authors: Changfei Yao; Xiaoxiao Feng; Jinhai Sun; Feng Huang
• Keywords: 0202 electrical engineering, electronic engineering, information engineering; 02 engineering and technology; 7. Clean energy

This paper presents the design, construction, and testing of a 183-GHz FMCW transceiver module for wireless fuse applications. The transmitter consists of a square-triangle wave converter, a Ku-band VCO, a 91.5-GHz × 2 × 3 multiplying and amplifying chain, a 10-dB multi-hole directional coupler, and a 183-GHz frequency doubler. For the multiplying chain, the generated 91.5-GHz signal power is partly coupled out by the 10-dB coupler. The coupled output power is used as local oscillator (LO) signal to pump the 183-GHz subharmonic mixer (SHM). The receiver is cascaded by a 183-GHz SHM and a low-noise immediate frequency (IF) amplifier. The measured typical output power of the 183-GHz transceiver is 48 mW and the minimum noise temperature of the receiver is 620 K at 181 GHz. At 5-mm and 10-mm detection distance, the measured signal noise ratio (SNR) of transceiver IF signal is higher than 30 dB and 17 dB at 10 KHz bandwidth, respectively. The SNR is high enough for the following signal processing.