Chitosan, a new and environmental benign electrode binder for use with graphite anode in lithium-ion batteries

• DOI: 10.1016/j.electacta.2013.05.009
• Publication Date: 2013-05-14T07:00:16Z
• Authors: Lili Chai; Qunting Qu; Longfei Zhang; Ming Shen; Li Zhang; Honghe Zheng
• Keywords: 01 natural sciences; 7. Clean energy; 0104 chemical sciences

Abstract Chitosan was applied as the electrode binder material for a spherical graphite anode in lithium-ion batteries. Compared to using poly (vinylidene fluoride) (PVDF) binder, the graphite anode using chitosan exhibited enhanced electrochemical performances in terms of the first Columbic efficiency, rate capability and cycling behavior. With similar specific capacity, the first Columbic efficiency of the chitosan-based anode is 95.4% compared to 89.3% of the PVDF-based anode. After 200 charge–discharge cycles at 0.5C, the capacity retention of the chitosan-based electrode showed to be significantly higher than that of the PVDF-based electrode. Electrochemical impedance spectroscopy (EIS) and scanning electron microscopy (SEM) measurements were carried out to investigate the formation and evolution of the solid electrolyte interphase (SEI) formed on the graphite electrodes. The results show that a thin, homogenous and stable SEI layer is formed on the graphite electrode surface with chitosan binder compared with that using the conventional PVDF binder