A theoretical model for including the effect of monotonic shear loading in the analysis of reinforced concrete beams

• DOI: 10.1016/j.engstruct.2013.02.035
• Publication Date: 2013-04-03T09:53:41Z
• Authors: Juan Navarro-Gregori; P.F. Miguel; M.A. Fernández; José R. Martí-Vargas
• Keywords: Reinforced concrete; INGENIERIA DE LA CONSTRUCCION; Bending; Diagonal cracking; Beams; Shear; 02 engineering and technology; MCFT; 0201 civil engineering

The authors of this work wish to thank the Universitat Politecnica de Valencia for the funding through the Programa de Apoyo a la Investigacion y Desarrollo (PAID-06-11).<br/>This paper presents a model for the analysis of reinforced concrete beams under monotonic loading conditions, including axial, bending, and shear forces, in order to effectively capture the mechanisms of shear transfer. The proposed model, or PR model, is based upon the Timoshenko Beam Theory, with the additional inclusion of two significant elements: a parabolic-shaped variable shear strain profile where the concrete is in compression and a straight line segment bounded by the neutral axis on the one hand and by the longitudinal reinforcement in tension on the other. The profile is defined by only three parameters, which are obtained by satisfying inter-layer longitudinal equilibrium at three strategic locations. The constitutive material model for reinforced concrete follows the basic assumptions of the Modified Compression Field Theory (hereinafter MCFT ). The validity of the model is established by analyzing its results under Bresler Scordelis and Vecchio Shim experimental tests. The model is further tested through comparison with additional traditional kinematic assumptions. Despite the assumption of a simple shear strain profile, the PR model gives reasonable predictions of the load deflection response and the ultimate load capacity for the experimental tests validated. Therefore, it is suitable for analysis of shearcritical reinforced concrete beams subjected to monotonic loading conditions. However, additional validation tests are required for proving the accuracy of the proposed model. Additional developments of the formulation are still required extending it to cross sections different from the rectangular one and to general loading conditions.<br/>