Migration and transformation of phosphorus and toxic metals during sludge incineration with Ca additives

• DOI: 10.1016/j.jenvman.2023.119910
• Publication Date: 2024-01-07T21:43:32Z
• Authors: Feihong Guo; Weizhen Liu; WeiWei Chen; Fei Wang; Houhu Zhang; Xiaoxiang Jiang; Jabbar Gardy

The recycling and utilization of phosphorus resources in sludge is becoming increasingly important. In this study, we compared the conversion of phosphorus and toxic metal passivation effects of different Ca additives under oxygen-rich combustion conditions and elucidated their specific mechanisms of action. The experimental results indicated that four Ca-based additives improved the recovery rate of total phosphorus, and promoted the generation of stable apatite phosphorus (AP). The effect of CaCl2 and CaO was greater than that of Ca(OH)2 and CaSO4. CaCl2 promoted the formation of Ca3(PO4)2 and Ca2P2O7, and CaSO4 improved the conversion of AlPO4 to Ca(H2PO4)2 with increasing temperature. The conversion capacity of CaO on non-apatite inorganic phosphorus to AP was greater than that of Ca(OH)2, and more CaH2P2O7, Ca(PO3)2, and Ca-Al-P minerals were found. Toxic metal percentages decreased after sludge incineration with CaCl2. Compared with CaO and Ca(OH)2, the toxic metal adsorption effect of CaSO4 was more significant. The influence of Ca additives on the conversion of Zn into stable components was as follows: CaCl2 > Ca(OH)2 > CaO > CaSO4. Ca additives reduced the toxic metal contamination level and ecological risk index values, and the order of toxic metal contamination levels was Ni > Zn > Cr > Cu > Mn. The experiment confirmed the conversion of phosphorus and the toxic metal passivation effect of Ca additives during oxy-fuel combustion of sludge, which is beneficial for its resource utilization.