Durability study of neat/nanophased GFRP composites subjected to different environmental conditioning

• DOI: 10.1016/j.msea.2010.02.022
• Publication Date: 2010-02-17T09:39:50Z
• Authors: S. Zainuddin; M.V. Hosur; Y. Zhou; Ashok Kumar; S. Jeelani
• Keywords: 0203 mechanical engineering; 02 engineering and technology

Abstract Experimental investigations on the durability of E-glass/nanoclay–epoxy composites are reported. SC-15 epoxy system was modified using 1–2 wt.% of nanoclay. Extent of clay platelet exfoliation in epoxy was evaluated using X-ray diffraction (XRD). Glass fiber reinforced plastic (GFRP) composite panels were fabricated using modified epoxy and exposed to four different conditions, i.e. hot (elevated temperature-dry, wet: 60 and 80 °C) and cold (subzero-dry, wet) for 15, 45 and 90 days. Weight change due to conditioning, quasi-static flexure and micrographic characterization were studied on the conditioned samples. Room temperature samples were also tested for baseline consideration. XRD results showed exfoliation of clay platelets in nanoclay–epoxy samples with decrease in peak intensity and increase in interplanar spacing. Samples subjected to hot-wet conditions showed higher percentage weight gain with a maximum of 4.25% in neat and 3.1% in 2 wt.% samples. Flexural tests results showed degradation with increasing time. Maximum degradation were observed for hot-wet (80 °C) for 90 days neat samples, i.e. 22.6% and 29.8% reduction in flexural strength and stiffness, respectively. However, less degradation was noticed for nanophased composites under similar conditions. Scanning electron microscopy (SEM) results of failed samples showed better interfacial bonding in nanophased composites.