The effect of hot bending and thermal ageing on creep and microstructure evolution in thick-walled P92 steel pipe

• DOI: 10.1016/j.msea.2015.07.072
• Publication Date: 2015-07-26T13:56:27Z
• Authors: V. Sklenička; K. Kuchařová; P. Král; M. Kvapilová; M. Svobodová; J. Čmakal
• Keywords: Tension (geology)

Abstract In this work, the creep behaviour of an actual thick-walled P92 steel pipe bent (90°) using local induction heating was investigated at 600 and 650 °C using uniaxial tension creep tests. Creep specimens were machined from the bend at different positions, namely at the intrados and extrados areas and neutral position and from the straight part of the pipe. Creep tests were followed by metallographic and fractographic analyses of the crept specimens to explain the observed creep behaviour. In order to accelerate the microstructural changes and thus to simulate long-term service conditions, isothermal ageing at 650 °C for 10,000 h was applied to selected creep specimens before creep exposures. The results of the creep tests performed on specimens extracted from the intrados and extrados of the thick-walled bent P92 steel pipe fall into the scatter band of the base P92 steel average line. No substantial differences were found at different positions of the pipe in the minimum creep rate, the time to fracture and creep fracture strain. However, significant detrimental effects on the creep resistance of the pipe were found after long-term static thermal ageing due to the microstructural instability of the material. The large Laves phase particles, which coarsened during ageing and creep testing, served as preferential sites for cavity nucleation leading to an accelerated tertiary stage of creep and/or premature creep fracture. Activation analysis of the creep data leads to the conclusions, that the creep tests were undertaken in the region of the power-law creep regime and the rate controlling creep deformation mechanism is most probably the climb of the intragranular dislocations.