Wear behavior of light-cured resin composites with bimodal silica nanostructures as fillers

• DOI: 10.1016/j.msec.2013.07.039
• Publication Date: 2013-08-09T22:47:48Z
• Authors: Ruili Wang; Shuang Bao; Fengwei Liu; Xiaoze Jiang; Qinghong Zhang; Bin Sun; Meifang Zhu
• Keywords: Light; Propylamines; Surface Properties; 02 engineering and technology; Silanes; Silicon Dioxide; Composite Resins; Nanostructures; Polyethylene Glycols; 03 medical and health sciences; 0302 clinical medicine; Polymethacrylic Acids; Nanoparticles; Bisphenol A-Glycidyl Methacrylate; Particle Size; 0210 nano-technology

To enhance wear behavior of resin composites, bimodal silica nanostructures including silica nanoparticles and silica nanoclusters were prepared and proposed as fillers. The silica nanoclusters, a combination of individually dispersed silica nanoparticles and their agglomerations, with size distribution of 0.07-2.70 μm, were fabricated by the coupling reaction between amino and epoxy functionalized silica nanoparticles, which were obtained by the surface modification of silica nanoparticles (~70 nm) using 3-aminopropyl triethoxysilane (APTES) and 3-glycidoxypropyl trimethoxysilane (GPS) as coupling agents, respectively. Silica nanoparticles and nanoclusters were then silanized with 3-methacryloxypropyl trimethoxysilane (γ-MPS) to prepare composites by mixing with bisphenol A glycerolate dimethacrylate (Bis-GMA) and tri (ethylene glycol) dimethacrylate (TEGDMA). Experimental composites with various filler compositions were prepared and their wear behaviors were assessed in this work. The results suggested that composites with increasing addition of silica nanoparticles in co-fillers possessed lower wear volume and smoother worn surface. Particularly, the composite 53:17 with the optimum weight ratio of silica nanoparticles and silica nanoclusters presented the excellent wear behavior with respect to that of the commercial Esthet-X, although the smallest wear volume was achieved by Z350 XT. The introduction of bimodal silica nanostructures as fillers might provide a new sight for the design of resin composites with significantly improved wear resistance.