Response of CR-39 to 0.9–2.5 MeV protons for KOH and NaOH etching solutions

• DOI: 10.1016/j.nima.2016.01.015
• Publication Date: 2016-01-12T15:57:35Z
• Authors: F. Bahrami; F. Mianji; R. Faghihi; M. Taheri; A. Ansarinejad
• Keywords: 03 medical and health sciences; 0302 clinical medicine; 7. Clean energy

Abstract In some circumstances passive detecting methods are the only or preferable measuring approaches. For instance, defining particles׳ energy profile inside the objects being irradiated with heavy ions and measuring fluence of neutrons or heavy particles in space missions are the cases covered by these methods. In this paper the ability of polyallyl diglycol carbonate (PADC) track detector (commercially known as CR-39) for passive spectrometry of proton particles is studied. Furthermore, the effect of KOH and NaOH as commonly used chemical etching solutions on the response of the detector is investigated. The experiments were carried out with protons in the energy range of 0.94–2.5 MeV generated by a Van de Graaff accelerator. Then, the exposed track dosimeters were etched in the two aforementioned etchants through similar procedure with the same normality of 6.25 N and the same temperature of 85 °C. Formation of the tracks was precisely investigated and the track diameters were recorded following every etching step for each solution using a multistage etching process. The results showed that the proposed method can be efficiently used for the spectrometry of protons over a wider dynamic range and with a reasonable accuracy. Moreover, NaOH and KOH outperformed each other over different regions of the proton energy range. The detection efficiency of both etchants was approximately 100%.