MEMS hydrogen gas sensor for in-situ monitoring of hydrogen gas in transformer oil

• DOI: 10.1016/j.snb.2020.128989
• Publication Date: 2020-09-30T16:39:55Z
• Authors: Vijay V. Kondalkar; Jihoon Park; Keekeun Lee
• Keywords: Hydrogen sensor; Wheatstone bridge; Microheater

Abstract Dissolved hydrogen gas analysis (DHGA) is a key aspect that defines the operational status of a transformer and is vital to the maintenance of safety standards in the power grid. In this report, we proposed, MEMS gas sensor arrays for DHGA with a specially designed system having a Wheatstone bridge circuitry with two pairs of resistors. The optimal temperature of the sensor was controlled using a monolithically integrated in-plane microheater and a temperature sensor to monitor the temperature change in the oil and to compensate for the temperature variations in resultant hydrogen sensor signals. The fabricated sensor in a transformer oil showed excellent H2 response (ΔVout = 62μV to 10 ppm and 4.71 mV to 2000 ppm). In addition, long-term stability of sensor performance was observed, confirming that the Al2O3 passivation layer and packaging were effective to enhance the robustness of the sensor in an oil environment. A customized, compact, and portable sensor interface electronics was developed and applied to the sensor system. The results obtained with the developed sensor interface were very similar to those measured with a digital multimeter. Our results demonstrate that the developed sensor system and packaging are very promising for long term monitoring of the operational status of transformers.