Stability assessment for transmission systems with large utility‐scale photovoltaic units

• DOI: 10.1049/iet-rpg.2015.0331
• Publication Date: 2016-01-18T13:26:29Z
• Authors: Pedro G. Bueno; Jesus C. Hernández; Francisco J. Ruiz...
• Keywords: 0202 electrical engineering, electronic engineering, information engineering; 02 engineering and technology; 7. Clean energy

Photovoltaic (PV) systems are gradually replacing conventional synchronous generators. However, reduced system inertia and lack of dynamic grid support from PV are the main issues that could have a detrimental impact on the transient response in power systems when critical contingencies arise. In this study, the authors modelled and analysed transient and small‐signal stability for a representative transmission system with realistic loading scenarios and high PV penetration levels. First, system eigenvalues were calculated to identify critical modes. Thereafter, the results of the small‐signal analysis were further expanded by performing transient simulations after critical contingencies. Such contingencies detrimentally excited the critical modes of the system. To carry out this analysis, they implemented a positive‐sequence dynamic model of a utility‐scale PV unit (USPVU) in the open programming environment MATLAB/Simulink. This dynamic model is based on a Western Electricity Coordinating Council (WECC) generic model (full converter model), which is suitable for electromechanical transient studies. Also included was the model of the PV array, dc–dc converter, and associated control systems. The most critical factors pertaining to the detrimental or beneficial impact of USPVUs on stability were the unit commitment and dispatch strategy and the protection/control strategy during voltage swell and dip events for equivalent PV penetration and loading scenarios.