Low-cost and Chemical Resistant Microfluidic Devices Based on Thermoplastic Elastomers for a Novel Biosensor System

• DOI: 10.1557/proc-872-j11.4
• Publication Date: 2017-04-06T11:43:49Z
• Authors: I. Stoyanov; M. Tewes; S. Glass; M. Koch; M. Löhndorf
• Keywords: Embossing; Fluidics; Thermoplastic elastomer; Thermoplastic polyurethane

AbstractLow-cost and chemical resistant microfluidic devices based on thermoplastic elastomers have been fabricated by hot embossing technology. Commercial available thermoplastic elastomer foils based on polyurethane (PU) in a thickness range of 100-600 μm have been used. Prior to the fabrication of the microfluidic devices the chemical resistance of the material against a wide range of standard biological buffer solutions and solvents had been analysed. We created systems of channels, reservoirs and holes for the connections to external capillaries by double-sided hot embossing with an alignment accuracy of +/- 3 micrometer. Closed channel structures were produced by an additional chemical bonding process of the embossed devices with another thermoplastic elastomer foil. The total volume of the fluidic cell was 2 μl/sensor for the use with SAW (surface-acoustic wave) sensor chip and about 0.2 μ/sensor for the impedance sensors. A novel multi-chamber fluidic device was successfully tested for in-situ immobilization of thrombin antibodies and Bovin Serum Albumin (BSA) on different sensor elements of the same sensor chip.