Thermal De-Oxygenation to Form Condensable Aerosol From Reconstituted Tobacco without Auto-Ignition
oxygen concentration
solid-phase residue
aerosol
13. Climate action
Science
Q
auto-ignition
0202 electrical engineering, electronic engineering, information engineering
02 engineering and technology
inorganic compounds
7. Clean energy
DOI:
10.2478/cttr-2022-0014
Publication Date:
2022-12-10T12:14:29Z
AUTHORS (19)
ABSTRACT
Summary
A novel concept is described here that utilizes externally applied heat to a solid rod of reconstituted tobacco biomass to form a stream of aerosol under progressively oxygen-deficient atmosphere. The boundary of auto-ignition was determined at oxygen concentrations of 0%, 5%, 10%, and 21% and then the effects of these different atmospheres on various parameters were studied. Experimental results indicated that the ignition temperature decreased with the increase of oxygen concentration and a negative temperature coefficient (NTC) for atmosphere with oxygen was observed at before but close to ignition temperature. Significant differences in the yields of CO and CO2 between oxygen and oxygen-free atmosphere were observed. The mass of aerosol produced under an inert atmosphere and reduced-oxygen atmosphere were characterized with selected volatile and semi-volatile components, phenols, aldehydes, and other organic compounds of interests. In addition, higher oxygen concentration resulted in higher bulk and surface oxygen content of solid-phase residue, the reduction of carbon and hydrogen element content and related functional groups, and the content of inorganic compounds also exhibited an increase with oxygen concentration. By systematically changing oxygen concentrations of the biomass bed with increasing temperatures, an aerosol stream of controlled chemical composition and yields could be formed without leading to ignition. Key chemical markers of inhalation harm were measured and compared to each other under different degrees close to combustion. Studying reconstituted tobacco or other biomass materials in such a way could provide alternative and useful information in the design heated biomass aerosol generators.
SUPPLEMENTAL MATERIAL
Coming soon ....
REFERENCES (43)
CITATIONS (5)
EXTERNAL LINKS
PlumX Metrics
RECOMMENDATIONS
FAIR ASSESSMENT
Coming soon ....
JUPYTER LAB
Coming soon ....