Ni-Cr Based Self Lubricating Composite Performance for High Speed Engineering Application

• DOI: 10.24874/ti.1469.04.23.06
• Publication Date: 2024-03-05T16:45:39Z
• Authors: Vilas K. Matsagar; Uddhav M. Shirsat; Prashant B. Kushare
• Keywords: wear analysis; TJ1-1570; self lubricating composite; high speed; Mechanical engineering and machinery

Developed High speed-rotating machinery is used in agriculture for various processes. This machinery runs using the tractor PTO operated at variable speed. Operating systems of machinery were depends on the skill of the driver. Due to jerks during operation and lack of maintenance such machinery gets fails. To increase the life of rotating components, Ni-Cr based self-lubricating composite bearings were developed and used for the actual application. Self-lubricating composite was tested under the different velocities of 3.14, 3.77, 4.71, and 6.28m/s up to a maximum of 8 Hours. The average wear rate of 7.2%MoS2 content composite is less than the other compositions of Ni-Cr-wt% of MoS2 self-lubricating composite. The result of the actual trial shows that the average wear rate of Ni-Cr- 7.2 wt%MoS2 at velocities 3.14m/s,3.77m/s,4.71m/s, and 6.28m/s is 5.74*10-9mm3/Nm, 6.09*10-9mm3/Nm, 6.30*10-9mm3/Nm, and 6.44*10-9mm3/Nm respectively.