Static and Dynamic Mechanical Behavior of Carbon Fiber Reinforced Plastic (CFRP) Single-Lap Shear Joints Joule-Bonded with Conductive Epoxy Nanocomposites

• DOI: 10.3390/jcs8030112
• Publication Date: 2024-03-21T08:34:46Z
• Authors: Yuheng Huang; Ian A. Kinloch; Cristina Vallés
• Keywords: adhesive joints; carbon nanotubes; 0203 mechanical engineering; ResearchInstitutes_Networks_Beacons/henry_royce_institute; name=Henry Royce Institute; graphene; epoxy nanocomposites; fatigue resistance; 02 engineering and technology; lap shear strength; ResearchInstitutes_Networks_Beacons/national_graphene_institute; name=National Graphene Institute

The potential of electrically conductive graphene nanoplatelets (GNPs)/epoxy, multi-walled carbon nanotubes (MWNCTs)/epoxy and hybrid GNPs-MWCNTs/epoxy nanocomposites as adhesives for out-of-autoclave (OoA) and in-the-field CFRP repair via Joule heat curing was investigated. Scanning electron microscopy revealed a good dispersion of the nanoparticles in the matrix in all the nanocomposite adhesives above their percolation thresholds, which led to a homogeneous distribution of the heat generated during Joule CFRP repair. The joints bonded with neat epoxy and the nanocomposites showed similar lap shear strengths, with the addition of nanoparticles enhancing the fatigue performance of the adhesively bonded joints relative to when neat epoxy was used as an adhesive and oven-cured. The interfacial and cohesive failure mechanisms were found to coexist in all the cases, with an increasing dominance of the cohesive when nanofillers were embedded into the adhesive. No effect of the specific type of nanofiller incorporated into the epoxy as the conductive component was observed on the mechanical performance of the bonded joints, with the adhesives containing MWCNTs showing similar results to those filled with GNPs at considerably lower loadings due to their lower percolation thresholds. The independence of the properties regardless of the curing method highlights the promise of these Joule-cured adhesives for industrial applications.