A5041880086- Microstructure and Mechanical Properties of Steels
- Metallurgy and Material Forming
- High Temperature Alloys and Creep
- Metal Alloys Wear and Properties
- Metallurgical Processes and Thermodynamics
- Hydrogen embrittlement and corrosion behaviors in metals
- Electron and X-Ray Spectroscopy Techniques
- Microstructure and mechanical properties
- Advanced Materials Characterization Techniques
- Fatigue and fracture mechanics
China Iron and Steel Research Institute Group
2008-2018
Shougang Institute of Technology
2018
University of Nevada, Las Vegas
2003
The microstructural evolution of Laves phase in 9Cr–3W–3Co steel under long-term isothermal treatment has been experimentally investigated this paper. As distinguished SEM-BSE images, the mean size and area fraction particles are statistically measured. With help thermodynamic calculation analysis, weight precipitates at equilibrium state aging for up to 10 000 h is analyzed. W matrix depleted; enhances formation coarsening phase. This might be explanation softening behavior deterioration...
Creep rupture tests of 9Cr-3W-3Co steel were conducted in the range 120 to 200 MPa at 650 °C. The influence stress on microstructure evolution was investigated detail. In high regime, a large density dislocation generated and induced precipitation fine dispersive particles. However, lower stresses, transformation from martensite laths size subgrains coarsening precipitates took place due significant recovery loss pinning effect during long term exposure. Thermodynamic results revealed...
Journal Article Comparison of Different Sample Preparation Techniques in TEM Observation Microstructure INCONEL alloy 783 Subjected to Prolonged Isothermal Exposure Get access LZ Ma, Ma Harry Reid Center for Environmental Studies, University Nevada Las Vegas, NV 89154 Search other works by this author on: Oxford Academic Google Scholar Y-C Wang, Wang FEI Company, 7451 NW Evergreen Parkway, Hillsboro, OR 97124 J Ringnalda, Ringnalda S Pfeiffer Gatan Inc., 5933 Coronado Lane, Pleasanton, CA...
In order to research the heat treatment process of hydrogen 12Cr2Mo1VR steel, small furnace 50 kg was smelted and rolled. The influence cooling rate on microstructure steel studied, quenching tempering explored. It is found that austenitizing temperature should be above 875°C in obtain better solid solution strengthening effect avoid two coarsening caused by undissolved phase after quenching. serious M6C with coarse tempering, higher than 706°C. After comparing impact properties tensile...