A5018539424- Advanced ceramic materials synthesis
- Aluminum Alloys Composites Properties
- Advanced materials and composites
- Aluminum Alloy Microstructure Properties
- Polymer Nanocomposite Synthesis and Irradiation
- Tribology and Wear Analysis
- Polymer Nanocomposites and Properties
- Bauxite Residue and Utilization
Selçuk University
2012-2021
In this study, an Al–10 wt-%Al2O3 composite powder prepared by mechanical alloying was investigated at different milling times. To evaluate the effects of amount methanol as a process control agent on characteristics alloyed Al–Al2O3 and properties materials, powders materials have been successfully produced with amounts methanol, namely, 1, 2 3 wt-%. The were characterised using scanning electron microscope (SEM), laser particle size analyser, X-ray diffraction analysis Vickers...
In this work, gas atomization technique was used to produce aluminum matrix powders (AA7075).Thereafter; boron carbide (B 4 C) particle reinforcements participated into and then composite mixtures were prepared via powder technology.SEM analyze method describe material's microstructural properties it observed that B C particles homogeneously distributed in the AA7075 after 4h of milling time.As a result; parameters which time, closeness each other size with reinforced material increasing...
In this study, firstly, AA7075 metal powder which average particle size 43.9 µm were manufactured by using gas atomization method. Thereafter with mechanical alloying method metallurgy manufacturing methods, 10% B4C reinforcements that of 49.5 participating into matrix composite mixtures prepared. They milled for different durations (0-8 hrs) in a high energy planetary ball mill. From these powders; 550°C and under pressure 500 MPa, materials produced the hot pressing. SEM analysis, after 4...
In this study, production and mechanical properties of the hybrid nanocomposite were investigated experimentally estimated. Hybrid nanocomposites include boron carbide (B 4 C) multi walled carbon nanotube (CNT) in epoxy resin. B C CNT mixed into with different percentages produced. Tensile strength values produced samples was determined compared. Thermal stability analyzed by TGA. Samples are diversified Taguchi method. The optimum sample comparison experimental estimated results. Finally,...
Yaygın olarak kullanılan karbür parçacıkları göz önüne alındığında, titanyum (TiC), sahip olduğu üstün fiziksel, mekanik özellikleri ve özellikle alüminyum ile uygun ara yüzey bağlanma yeteneğine olması nedeniyle sıkça tercih edilen bir takviye malzemesi kabul edilir. Bu çalışmada, ağırlıkça 3% nano (nTiC) takviyelendirilmiş AA7075 alaşım matrisli kompozit malzemeler, bilyeli öğütme ardından sıcak presleme yoluyla başarıyla üretilmiştir. Öğütme süresinin (15 dk., 2 10 sa.) tozların...