Wire Cut Electric Discharge Machining (WCEDM) is a novel method for machining different materials with application of electrical energy by the movement wire electrode. For this work, an AZ61 magnesium alloy reinforcement boron carbide and silicon in percentage levels was used plate formed through stir casting technique. The process parameters are namely %, stirring speed, time stirring, temperature. specimens were removed from casted composites process, material removal rate surface...

The current experimental research encompasses the outcome of pre-treatment rubber fiber (RF) derived from discarded tires when utilized in concrete as a limited substitution sand by its volume. To overcome causes reduction strengths after inclusion particles (RP) fractional or complete replacement fine aggregates, three different pre-treatments are adopted this study using sodium hydroxide (NaOH), hydrochloric acid (HCL), and water spray method, obtained results compared with controlled...

In this technology era, sustainable construction practices have become quite imperative. The exploration of alternative materials to reduce the environmental footprint is paramount importance. This research paper delves into an exhaustive investigation concerning utilization recycled coarse aggregates (RCA) and rubber particles (RP) in concrete. It contributes growing body knowledge aimed at fostering development industry by reducing waste, promoting recycling, mitigating building materials....

Artificial aggregate (AF), i.e., silico manganese (SiMn) slag aggregate, is a byproduct of ferromanganese and alloy production. The utilization industrial waste byproducts in construction has increased the aim conserving natural resources to nurture pollution-free environment. current study examines performance use artificial (AF) partial replacement cement with fly ash (FA). properties fresh concrete, as well compressive flexural strength split tensile concrete were evaluated. Seven mix...

The orthophosphoric acid-treated pomegranate peels (POPAC) performance was investigated through batch mode for Methylene Blue dye (MB) adsorption from an aqueous solution. Although chemical activation using various agents has been explored by other research work, but novelty application of H3PO4 in a 1:1 weight percentage exhibits unprecedented enhancing the efficiency MB removal. Dependent parameters were optimized, with pH sample, contact interval, initial concentration, and dose...

The sugar industry produces a huge quantity of cane bagasse ash in India. Dumping massive quantities waste non-eco-friendly manner is key concern for developing nations. main focus this study the development sustainable geomaterial composite with higher strength capabilities (compressive and flexural). To develop composite, sugarcane (SA), glass fiber (GF), blast furnace slag (BF) are used. Ash generated from burning known as bagasse. check suitability secondary use civil engineering to...

The effect of reinforcements and thermal exposure on the tensile properties aluminium AA 5083–silicon carbide (SiC)–fly ash composites were studied in present work. specimens fabricated with varying wt.% fly silicon subjected to T6 cycle conditions enhance through “precipitation hardening”. analyses microstructure elemental distribution carried out using scanning electron microscopic (SEM) images energy dispersive spectroscopy (EDS). composite thus treatment exhibit uniform reinforcements,...

Abstract A continuous mode fixed-bed up-flow column adsorption analysis was conducted utilizing Acacia nilotica sawdust activated carbon (ASAC) as an adsorbent for the treatment of toxic Indigo Carmine Dye (ICD). The effect on characteristics ASAC influent ICD concentration, flow rate, and bed depth has been investigated. According to study, highest efficiency removal approximately 79.01% at a preliminary concentration 100 mg/L with rate 250 mL/h 30 cm power 24.67 mg/g. experimental work...

Water tanks are critical structure, and the investigation of seismic activity is now receiving significant attention. This study examines impact revised Indian Standard IS 1893 (Part 2): 2014, which was implemented in March 2022, on performance elevated water tanks. The IITK-GSDMA Guidelines (IITK-GSDMA 2007) impacted these improvements, especially those dealing with response reduction factors. modifications assessed by contrasting prior code base shear, hydrodynamic pressure, moment,...

In road safety, accidents involving collisions with dividers often result in severe injuries and fatalities. To mitigate the impact of such accidents, this study focuses on designing testing flexible to reduce collision severity real-time alerting through IoT Integration. A novel divider incorporates advanced materials like expanded polystyrene separators barriers (EPS), specific engineering principles design, shape, flexibility make capable absorbing dissipating kinetic energy after impact....

Generally, a parallel connection of generators is required to meet the power need supply load demand. As preferable replacement for typical generation units, topology based on three-phase voltage source converters has been proposed. This paper proposes an approach virtual synchronous generator-based synchronverters operation alternators. automatically exchanges active and reactive between operated inverters same kind. Furthermore, serve purpose synchronization, Phase Locked Loop (PLL) used....

Greywater is the most sustainable option to address growing need for fresh water. This study aimed identify optimal operation variables of an electro-coagulation filtration (ECF) system treating domestic greywater, using different conditions (e.g., electrode combinations (Al-Fe-Al-Fe), initial pH (6.8–8.4), operating time (10–60 min), and voltage (6–24 volts)). A statistical data analysis was performed evaluate experimental modeling chemical oxygen demand (COD), total dissolved solids...

Mushroom waste substrates are highly resistant lignocellulosic wastes that commercially produced by industries after harvesting. These produce large environmental challenges regarding disposal and, thus, require treatment facilities. In the present article, effect of Eisenia-fetida-based vermicomposting and an effective microorganism solution on mushroom substrate were investigated using four different composting mixtures: [MW] with microorganisms [MW+EM], raw [RWM] [RMW+EM], [MW+V+EM],...

Assessment of biogas production from Napier Grass (NG) in co-digestion with cattle dung (CD) was carried out laboratory scale reactors and optimization using response surface methodology (RSM) Box-Behnken design the experiment. The effects total alkalinity (TA), volatile solids (VS), pH, fatty acids (VFA) at three levels were investigated along gas production. In this study, we determined optimal ratio for generation NG CD co-digestion. blending ratios adopted as NG:CD (50:50), (65:35),...

The demand for natural aggregates (river sand) is increasing day by day, leading to the destruction of environment, a burden that will be passed on young people. Further, wastes from various industries are being dumped in landfills, which poses serious environmental problems. In order ensure sustainability, both issues mentioned above can solved utilizing industrial waste as aggregate replacement concrete construction industry. This research done find out results using two substances viz.,...

Sustainable construction has gained paramount importance due to the consideration of devastating effects activities on environment. Researchers are exploring innovative approaches mitigate carbon footprint and enhance durability concrete. In order regulate demand cost concrete constituents, such as cement sand, there is a need invent alternative materials utilize various industrial agricultural wastes instead ingredients, either partially or completely. The experimental investigation...

<abstract> <p>Worldwide population growth and consumerism have elevated the water pollution problem to top of environmental priority list, with severe consequences for public health, particularly in agricultural countries such as India, where scarcity is a big challenge. Hence, greywater has potential be one most sustainable options meet growing need freshwater satisfying treatment options. This study focused on assessment electrocoagulation coupled filtration adsorption...